Shenzhen Touch-China Electronics Co.,Ltd.
Shenzhen Touch-China Electronics.,Ltd.
Add to Cart
15Inch Optical Bonding Display Module With Capacitive Touch Panel and Multi Touch
| Items | Parameters |
| LCD Screen Size | 15 inch |
| Aspect ratio | 4:3 |
| Resolution | 1024*768 |
| Visible Area | (H)304.128mm×(V)228.096mm |
| Viewing Angle | 80/80/80/80 (Typ.)(CR≥10) |
| Contrast Ratio | 600:1 |
| Response Time | 8 (Typ.)(Tr/Td) ms |
| Colors D | 8Bit 262K/16.7M , 60% NTSC |
| Scanning Frequency | 60Hz |
| Interface | LVDS(See 1.2 for details) |
| Operation Voltage | 3.3V |
| Back light Source | WLED |
| Center Luminance of White | 300cd/㎡ |
| Operating Lift of backlight | Min. 30K hours |
| Operation Voltage | 12V (for reference) |
| Operation Current | Typ current:240ma |
| BLU Power consumption | Max. 10.92W(for reference) |
| Touch Screen Type | 10 point G+G capacitive touch panel |
| Touch Mode | Finger or capacitor pen |
| Response Speed | 10ms |
| Reported Rate | 100Hz |
| Resolution | ≥4096×4096 |
| Touch Times | Durable single-point≥30 million times |
| Interface | USB |
| Working Voltage | Typical value+5VDC |
| Glass Thickness | Total 2.45mm±0.2(Cover1.1mm+SCA0.25mm+Senser1.1mm) |
| Surface Treatment | NO |
| Surface Durability | Surface hardness equals glass, Moh's hardness level≥7 |
| Transmittance | ≥85% |
| Bonding Way | Optical bonding |
| Bonding Material | OCA |
| Thickness | 0.175mm |
| Modele Size | (W)421mm×(H)346mm×(T)14.8mm |
| Net Weight | 1.52KG |
| Working Temperature | -20℃~+60℃ |
| Storage Temperature | -20℃~+60℃ |
| Working Humidity | ≤85%RH(non-condensing) |
| Storage Humidity | ≤85%RH(non-condensing) |
LVDS Interface Pin Define:
CN1 socket(Module size):185083-20121 (P-TWO ELECTRIC TECHNOLOGU CO,.LTD)
| Pin NO. | Symbol | Signal | Input data signal:8bit | Input data signal:6bit |
| 1 | VCC | Power supply | Power supply | |
| 2 | VCC | |||
| 3 | GND | Ground | Ground | |
| 4 | REV | Selection of scan direction | High:Reverse scan Low or Open:Normal scan | |
| 5 | D0- | Pixel data | R0-R5,G0 | |
| 6 | D0+ | |||
| 7 | GND | Ground | Ground | |
| 8 | D1- | Pixel data | G1-G5,B0-B1 | |
| 9 | D1+ | |||
| 10 | GND | Ground | Ground | |
| 11 | D2- | Pixel data | B2-B5,DE | |
| 12 | D2+ | |||
| 13 | GND | Ground | Ground | |
| 14 | CLK- | Pixel data | Pixel clock | |
| 15 | CLK+ | |||
| 16 | GND | Ground | Ground | |
| 17 | D3- | Pixel data | R6-R7 G6-G7 B6-B7 | Ground |
| 18 | D3+ | |||
| 19 | NC | Non connection | -- | |
| 20 | SEL6/8bit | Selection of the number of colors | LOW | High or Open |
Capacitive touch panel:
Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
FAQ:
