Shenzhen Touch-China Electronics Co.,Ltd.
Shenzhen Touch-China Electronics.,Ltd.
Add to Cart
21.5 inch 10 points USB OCA optical bonding 1920*1080 capacitive touch LCD module
Description:
The patented designing plastic frame is made by molding injection and features with high precision and consistency.
The plastic frame holds touch screen seamlessly to achieve anti-dust and water; The PCAP touch screen doesn't contact any metal part directly to improve touch reliability; sunk designing of the frame border makes the touch monitor be flush mounted with various cabinets, it brings excellent appearance to customers.
The kit combined touch screen and plastic frame is fixed with chassis via screws, not as same as the others by using adhesive tape. It simplifies production procedure and improves serviceability significantly.
Optical bonding technology: Optical bonding technology is using optical glue TP assembly LCD and touch panel together without air. It's different from traditional adhesive bonding products. For traditional adhesive bonding products, double sided adhesive is pasted around four edges, there is still air gap between touch panel and LCD. For optical bonding products, there is glue the whole surface of the LCD. Dust and fog can't go inside. And the display effect will be great.
Features of optical bonding product:
1.Since there is no gap between LCD and touch panel after assembly, dust and fog can't go inside the module.
2.There will be low interference of LCD to touch panel.
3.Vivid and clear crystal display performance than ordinary bonding method.
4.Improved hardness, vibration resistance of TFT module
Reliable Testing of Touch Screen:
| Working temperature and | -20~+70℃, 20~85%RH |
| Storage temperature and | -30~+80℃, 20~85% RH |
| Humidity resistance | 85% RH, 120H |
| Heat resistance | 70℃, 120H |
| Cold resistance | -20℃, 120H |
| Thermal shock | -20 ℃ (0 . 5hour)-70 ℃ (0 . 5hour) |
| Humidity resistance | The requirement shall be satisfied after being exposed at 85% RH for |
| Heat resistance | The requirement shall be satisfied after being exposed at 80℃ for 120 |
| Cold resistance | The requirement shall be satisfied after being exposed a t -30℃ for 120 |
| Thermal shock | The requirement shall be satisfied after being exposed at -30℃ (0.5 |
LVDS Interface Pin Define:
CN1 socket(Module size):FI-X30HL (JAE)
| Pin NO. | Symbol | Signal |
| 1 | RXO0- | Pixel data |
| 2 | RXO0+ | Pixel data |
| 3 | RXO1- | Pixel data |
| 4 | RXO1+ | Pixel data |
| 5 | RXO2- | Pixel data |
| 6 | RXO2+ | Pixel data |
| 7 | GND | Ground |
| 8 | RXOCLK- | Pixel clock |
| 9 | RXOCLK+ | Pixel clock |
| 10 | RXO3- | Pixel data |
| 11 | RXO3+ | Pixel data |
| 12 | RXE0- | Pixel data |
| 13 | RXE0- | Pixel data |
| 14 | GND | Ground |
| 15 | RXE1- | Pixel data |
| 16 | RXE1+ | Pixel data |
| 17 | GND | Ground |
| 18 | RXE2- | Pixel data |
| 19 | RXE2+ | Pixel data |
| 20 | RXECLK- | Pixel clock |
| 21 | RXECLK+ | Pixel clock |
| 22 | RXE3- | Pixel data |
| 23 | RXE3+ | Pixel data |
| 24 | GND | Ground |
| 25 | NC | Do not connect |
| 26 | NC | Do not connect |
| 27 | NC | Do not connect |
| 28/29/30 | VDD | Power Supply Input Voltage 5V |
Product Specification of Touch Screen LCD Module:
| Items | Parameters |
|
LCD Screen Size | 21.5 inch |
| Aspect ratio | 16:9 |
| Resolution | 1920×1080 |
| Visible Area | (H)476.064mm×(V)267.786mm |
| Viewing Angle | 89/89/89/89 (Typ.)(CR≥10) |
| Contrast Ratio | 3000:1 |
| Response Time | 13/5 (Typ.)(Tr/Td); 20 (Typ.)(G to G) ms |
| Colors D | 8Bit 16.7M , 72% NTSC |
| Scanning Frequency | 60Hz |
| Interface | LVDS(See 1.2 for details) |
| Operation Voltage | 5V |
| Back light Source | WLED |
| Center Luminance of White | 350cd/㎡ |
| Operating Lift of backlight | Min. 30K hours |
| Operation Voltage | 58V~65V (for reference) |
| Operation Current | Typ current:240ma |
| BLU Power consumption | Max. 10.6W(for reference) |
| Touch Screen Type | 10 point G+G capacitive touch panel |
| Touch Mode | Finger or capacitor pen |
| Response Speed | 10ms |
| Reported Rate | 100Hz |
| Resolution | ≥4096×4096 |
| Touch Times | Durable single-point≥30 million times |
| Interface | USB |
| Working Voltage | Typical value+5VDC |
| Glass Thickness | Total 2.45mm±0.2(Cover1.1mm+SCA0.25mm+Senser1.1mm) |
| Surface Treatment | NO |
| Surface Durability | Surface hardness equals glass, Moh's hardness level≥7 |
| Transmittance | ≥85% |
| Bonding Way | Optical bonding |
| Bonding Material | OCA |
| Thickness | 0.175mm |
| Modele Size | (W)525mm×(H)312mm×(T)13 mm |
| Net Weight | 3.84KG |
| Working Temperature | 0℃~+50℃ |
| Storage Temperature | -20℃~+60℃ |
| Working Humidity | ≤85%RH(non-condensing) |
| Storage Humidity | ≤85%RH(non-condensing) |
Technical Drawings: